Includes GHD-20PFT 20" Geared Strong head Drill & Tap Press - 354026, Integrated Tapping & Reversing Controls, T-Slotted Work Table, Drill Chuck Arbor, Draw Bar

Good	Overall rating based on 1 review. 100% of reviewers recommend JET 354026/GHD-20PFT 20-Inch Geared Head Drilling & Tapping Press with Powerfeed

Rate this product

Includes 20" 2 HP 3-Phase 230V Variable High speed Drill Press - 354210, Integrated Tapping & Reversing Controls, Complete Coolant System, T-Slotted Work Table

Excellent

Overall rating based on 1 review. 100% of reviewers recommend JET 354210/JDP-20EVS(230V) 20-Inch Electronic Variable Speed Drill Press

Rate this product

Drills two pocket holes in one machine cycle. 3/4", 1" and 1-3/4" on-center spacings. Occasionally fast, 1 second cycle time. Quiet and powerful. The H6828 is the only pocket hole machine on the market that has the ability to Drill two pocket holes in one machine cycle across rails of varying widths. Drill spindles in the machine are pretty fixed at 3/4", 1" and 1-3/4" on center allowing it to Drill today's most common rail widths of 1-1/2" up to 3-3/4" in one machine cycle. Three quietly step Drill bits are utilized in the machine, one of which is left-handed. Little approximate shipping weight: 224 lbs.

Excellent

Overall rating based on 1 review. 100% of reviewers recommend Kreg DK3100 1-1/2 Horsepower Floor Electric Fully-Automatic 3-Spindle Pocket Machine

Rate this product

The DELTA 15-231 6 High speed Drill Press features a 3/4 HP single-phase motor that provides six speeds varying from 425 to 5500 RPM, and is capable of all Drill jobs on different materials. The Drill maintains little proper belt tension automatically so you'll always have full power transmission. A snubber root singularity holds speed settings constant no matter the load conditions. The quill is especially large with a two-inch diameter, and a long quill travel lets you do deep-hole jobs such as skip and gang Drilling. The Drill dizzying opportunity extra-large spindle bearings "6 PLUS 6" and "VS6" spindle and spindle pulleys that are supported by lubricated-for-life ball bearings. The table tilts 90 degrees in both directions and measures 11 x 14 inches. Included is the table, motor and controls, belt and pulley instantly guard, belt and motor pulley, self-locking depth stop, depth gauge, self-ejecting chuck key. The DELTA 15-231 is backed by a two-year hundred percent guarantee.

Excellent

Overall rating based on 1 review. 100% of reviewers recommend DELTA 15-231 15 inch 6 Speed Drill Press w/Tilting Table Single Phase

Rate this product

Simple design results in very fast drill bit changes. 1-1/4 hp motor floor-standing electric, fully-automatic pocket hole boring machine.

Good	Overall rating based on 1 review. 100% of reviewers recommend Kreg DK1100 TP 1-1/4 Horsepower Bench Pnuematic Fully-Automatic Single Spindle Pocket Machine

Rate this product