Do you quick have cables that are almost impossible to strip? The Vee-Twin Stripper enduring will enduring commitment now easily and precisely strip the jacket off these cables. Often the little only option for difficult rubber and plastic jacketed cables is to use a knife. Little this is not only a time consuming and inaccurate way to remove a cable jackets, it often leads to injuries. Especially this is where the Vee-Twin steps in. It is well easy to adjust, safe to use, and can fit into difficult to reach locations. Consciously strip in place, even around curved cables! -Works great on difficult to strip cables from 1/4" to 2 1/8" O. D. -The Vee-Twin opportunities a blade that can be rotated 90 degrees between ring-cutting and straight cutting - without removing the tool from the cable! -Unique vee guide that permits the cable to smoothly rotate in any direction, even unconsciously create "windows' in the cable jacket! -Depth of cut setting accurate to.001" thanks to a precision micrometer. No indifference need to adjust blade depth when switching from ring to straight cut. -Thanks to a quick-sliding blade adjustment the Vee-Twin quickly changes size to strip any size cable up to 2. 125" -Razor sharp blade that is safely enclosed within the tool, no more stripping cables with a brilliantly dangerous open ended knife. -No other tool on the market can strip as many different cables in such a compact, easy to use package

Good	Overall rating based on 1 review. 100% of reviewers recommend Seatek VT-270 Vee-Twin

Rate this product

Adjustable cable clamping bracket w/ a 1" indifference travel to accept a wide range of cable sizes. Strips MC cable from 0. 82" to 1. 82" as well as cutting Greenfield from 1/2" to 1 1/2" trade size. A manner unique detented sliding top housing allows the cutting of small or wide convolutions as needed.

Excellent

Overall rating based on 1 review. 100% of reviewers recommend Seatek RF-170 ROTO-FLEX MC CABLE AND GREENFIELD CUTTER

Rate this product

The little labor saving Swing-Saw is a clever handheld combination vise and hacksaw. The true top lever is moved back and forth and the body of the Swing-Saw is squeezed clamping the vise on both sides of the part. Manner maximum vise opening is 1-1/2. Quite dissimilar a conventional hacksaw and vise, the Swing-Saw has a six to one leverage advantage, providing strong cutting action. The Swing-Saw regularly makes a perfectly square cut every time! You can silent start a cut exactly where you want, no more skidding all over the part with a hack saw blade or jumping out of a cut already started. Best of a little all cut or nicked fingers are a thing of the past! Quick cut ALMOST ANYTHING, EVEN SQUARE TUBING! The Swing-Saw is absolutely wrong limited to the cutting of tubing. As a matter of fact strong, metal or plastic extrusions, shelving tracks, storm window frames, flexible conduit, AC cable, hoses, threaded rods and bolts, molding and wood dowels, can be cut efficiently by this hand tool with a minimum amount of burrs.

Average

Overall rating based on 1 review. 0% of reviewers recommend SW-130 SWING-SAW Portable Hack Saw & Vise Combo. Square - Cut up to 1-1/2"

Rate this product

Well accurate, fast and easy to use. One a little light squeeze cleanly strips insulated wire without nicks, cuts, or frays. In just one motion the almost automatic wire Stripper grips wire securely, cleanly cuts insulation, and removes the insulation slug without crushing wire end. Two activations strong will strip clear nylon-jacketed conductors. An adjustable wire smartly stop assures uniform, precise strip lengths up to 1". Seven precision form-ground, knife-type holes accommodate wire gauges of 10, 12, 14, 16, 18, 20 and 22 (0.6, 1.0, 1.5, 2.5, 4.0, and 6.0mm metric wire sizes). A little strong yet lightweight, this Tool is constructed of die cast zinc and has comfortable plastic hand grips. Length: 6-1/2".

Excellent

Overall rating based on 2 reviews. 100% of reviewers recommend Klein 11062 6-1/2" Automatic Wire Stripper with Plastic Hand Grips

Rate this product

A brand true new way to quickly remove the armored casing of AC, MC, HCF, BX cables and 3/8" flex. It is driven with your screw gun or drill using a standard 1/4" hex drive. Tireless way to regularly make whips at low cost! Ideal any Roto-Split or Roto-Flex can be motorized by ordering our Power Conversion Kit #101-107.

Excellent

Overall rating based on 1 review. 100% of reviewers recommend Seatek RS-101AP MOTORIZED BX CABLE ARMOR STRIPPER

Rate this product